Briggs-stratton 146400 Manuale Utente

Navigare online o scaricare Manuale Utente per Per l'auto Briggs-stratton 146400. Briggs & Stratton 146400 User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 6
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
Briggs & Sfr?Je*©iii!
mo AND MA^NTlfsiAWCl
INSTRUCTIONS
MODELS
146400 to 146457
170400 to 170457
190400 to 190457
IN THE INTEREST OF SAFETY, 00 NOT RUN ENGINE AT EXCESSIVE SPEEDS
Operating an engine at excessive speeds increases the hazard of personal injury. DO NOT TAMPER WITH PARTS WHICH MAY
INCREASE THE GOVERNED SPEED.
For rotary lawnmower safety, USA Standard Safety Specifications for Power Lawn Mowers specify a maximum blade tip speed
of 19,000 feet per minute, primarily to reduce the hazard from thrown objects.
Rotary lawnmower manufacturers select the governed top speed of the engine based on the length and design of the cutter
blade and design of other mower parts.
All rotary lawnmowers should be checked for conformance to the USA Standard Safety Specifications for Power Lawn Mowers
on blade tip speed, if the engine is repaired or replaced, or if mower parts are changed.
Dirt and grass clippings, or other debris, in cooling fins or governor parts can affect engine speed. See cleaning instruc
tions in Section 3.
CAUTIOIM
TO PREVENT ACCIDENTAL STARTING always remove the spark plug before working on the engine or equipment driven by the
engine or remove cable from spark plug and insert terminal in V-notch in cylinder head cover.
DO NOT RUN THE ENGINE IN AN ENCLOSED AREA. Exhaust gases contain carbon monoxide, an odorless and deadly poison.
DO NOT FILL GASOLINE TANK WHILE ENGINE IS RUNNING. Spilling gasoline on a hot engine may cause a fire or explosion.
Section
1
BEFORE STARTING
READ THE OPERATING INSTRUCTIONS OF
THE EQUIPMENT THIS ENGINE POWERS
©
FILL CRANKCASE WITH OIL-Use a high quality de
tergent oil classified "For Service SCorSD or MS".
Nothing should be added to the recommended oil.
Summer Winter
(Above 40® F.) (Under 40® f.)
Use SAE 30 Use SAE 5W-20 or SAE 5W-30
If not available. If not available.
Use SAE 10W-30 Use SAE 10W or SAE 10W-30
CAP 1 oW-40 Below 0® F,
Use SAE 10W or SAE 10W-30
Diluted 10% with Kerosene
DIRECTIONS: Place the engine level. FILL THE OIL
SUMP TO OVERFLOWING or to the FULL mark on dip
stick. Pour slowly. Capacity 2-3/4 pints.
EXTENDED OIL FILL (Optional). Remove cap and dip
stick and fill to full mark on dipstick. When checking
oil level push dipstick assembly firmly but slowly until
cap bottoms on tube. Do not overfill. Dipstick assem
bly must be pushed fully into tube at all times when
engine is operating.
©
FILL FUEL TANK Use clean, fresh, lead-free or
leaded "regular" grade automotive gasoline. Fill
tank completely !
DO NOT MIX OIL WITH GASOLINE.
AIR CLEANER
OIL DRAIN PLUG
OIL FILLER PLUG
FORM NO. 270367-71
PRINTED !N U.S.A.
BRIGGS & STRATTON CORP.
Milwaukee, Wisconsin 53201
Vedere la pagina 0
1 2 3 4 5 6

Sommario

Pagina 1 - BEFORE STARTING

Briggs & Sfr?Je*©iii!mo AND MA^NTlfsiAWCl INSTRUCTIONS MODELS146400 to 146457 170400 to 170457 190400 to 190457IN THE INTEREST OF SAFETY, 00 N

Pagina 2 - (j^START ENGINE

(T) OPEN FUEL VALVECHOKE THE CARBURETORa. (Vlanual TypeMove lever in direction of arrow to fully closed choke position. Set governor cont

Pagina 3 - MAINTENANCE

Section2STARTING (cont’d)SPECIAL LOW TEMPERATURE STARTING PROCEDURE 1. Turn needle valve on carburetor 1/8 turn counterclockwise from

Pagina 4 - ADJUSTiVlENTS

Section3MAINTENANCE (cont’d)Dry Element TypeTo clean - tap element (top or bottom) on flat surface or wash in non-sudsing detergent and

Pagina 5 - GENERAL INFORMATION

Section4ADJUSTMENTS (cont’d)CHOKE-A-iVlATIC CARBURETOR CONTROL ADJUSTMENTSProper choke and stop switch operation is dependent upon proper adj

Pagina 6 - WARRANTY

Section6SERVICE & REPAIR INFORMATIONIf service or repair is needed, contact- an Authorized Briggs 8* Stratton Service Center. To ser

Modelli collegati 170457 | 270367-71 | 190457 | 146457 |

Commenti su questo manuale

Nessun commento