Briggs & Stratton 250000 Specifiche Pagina 26

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 338
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 25
2
NOTE: SPECIFICATION TABLES BEGIN ON PAGE 15 OF THIS SECTION.
4
Remove Flywheel
NOTE:For Aluminum Series engines: 80000 (with
cast iron flywheel), 100200, 100900,
110000 and 130000, and also for kerosene
Model Series 135400, 13K400, see text.
1. See Table No. 1, page 15 for correct flywheel puller.
2. Use flywheel nut to protect crankshaft threads and
for puller to bear against, Fig. 7.
3. Thread flywheel nut (1) onto crankshaft until top of
nut is flush with crankshaft threads or slightly
above end of threads.
NOTE:Care is required not to damage flywheel
fins, magnets or ring gear.
4. Fasten flywheel puller to flywheel with two screws
(2). Turn down two nuts (3) to loosen flywheel.
Fig. 7
1
2
3
Cast Iron Flywheel
Model Series 80000, 100200, 100900, 110000,
130000
1. Support flywheel with a gloved hand or a shop rag
while exerting an upward pull.
2. Strike outside rim of flywheel with a soft faced
hammer using a sharp blow.
3. Several blows may be required on a tight or rusted
flywheel, Fig. 8.
DO NOT STRIKE MAGNETS OR FINS.
NOTE:If puller screws on Flywheel Puller #19203
are too short, use two head bolts from
Model Series 280000, Part #93723.
Fig. 8
Model Series 280000
1. Remove blower housing and rotationg screen,
when so equipped.
2. Place Tool #19321, Flywheel Holder (1), on fan
retainer with lugs of flywheel holder engaging the
slots of the fan retainer, or use Tool #19372,
Flywheel Holder.
3. Loosen flywheel nut, flywheel screw, or rewind
starter clutch with socket and wrench or Tool
#19244, Starter Clutch Wrench, and wrench,
Fig. 9.
NOTE:If crankshaft extension, used with rewind
starter clutch, remains in crankshaft,
remove at this time.
Fig. 9
1
4. Remove two screws and fan retainer. Refer to
Table No. 1, Page 15 for correct flywheel puller by
Model Series.
Vedere la pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 337 338

Commenti su questo manuale

Nessun commento